Shop

For a limited time, spend $275 or more on any Brand of CCTV, or on Hikvision Alarms and receive Free Shipping within Australia for all of those components in your cart! *Excludes Cable, Racks, UPS + Monitors
DS-7616NI-M2

Hikvision 16-Channel 8K 16POE Ultra Series AI NVR 2 Bays NoHDD – DS-7616NI-M2-16P

05/04/2025
HikVision DS-UPS1000

Hikvision UPS 600VA/360W Fast Charge for CCTV & IT – DS-UPS600

17/04/2025
Show all

Hikvision DS-7608NI-M2/8P 8-Channel 8K Ultra NVR — 8×PoE, 32MP Input, 32TB Capacity — No HDD

AUD $615.00 inc GST

Hikvision DS-7608NI-M2/8P — 8-Channel 8K Ultra NVR | 8×PoE | Up to 32TB — No HDD

The Hikvision DS-7608NI-M2/8P 8 channel NVR is an Ultra M Series recorder built for demanding residential and commercial installations across Australia — true 8K HDMI output, plug-and-play 8 PoE ports, 128 Mbps incoming bandwidth and two independent HDD bays that scale to 32TB. Connect Hikvision IP cameras, set retention to match your compliance needs, and monitor from anywhere with Hik-Connect.

🖥️ 8K HDMI output — 7680×4320 @ 30Hz, plus 4K, 2K and 1080p modes. Independent HDMI and VGA outputs for dual-monitor setups.

📡 8 integrated PoE ports — powers and connects up to 8 Hikvision IP cameras via a single Cat6 cable each. IEEE 802.3af/at, total PoE budget ≤120W.

💾 Dual HDD bays — 2× SATA interfaces, up to 16TB per drive, maximum 32TB total storage capacity.

📷 Up to 32MP camera support — handles 32MP and 24MP inputs after ultra HD resolution mode is enabled. Standard mode supports up to 8MP across all 8 channels.

🔍 128 Mbps incoming bandwidth — carries simultaneous high-resolution streams from all 8 channels without frame drops or quality compromise.

▶️ 8-channel synchronous playback — review every camera at once for rapid incident investigation.

🔒 H.265+ compression — reduces storage consumption by up to 75% compared to H.264, stretching retention on the same drive capacity.

🌐 Hik-Connect remote access — live view, playback and push notifications on iOS and Android. Up to 128 simultaneous remote connections.

🔐 TLS stream encryption + double verification — protects footage in transit and controls who can play back or export recorded footage.

⚠️ No HDD included. This unit ships without a hard drive. Select your storage capacity separately:

👉 Browse compatible Hikvision surveillance HDDs

Download Datasheet

DS-7608NI-M2/8P — Hikvision Ultra Series 8-Channel 8K NVR — Built for Australian Installs That Need Room to Grow
8K HDMI output · 8×PoE ports · Up to 32TB storage · 128 Mbps incoming · H.265+ · TLS encryption · Full manufacturer warranty

The Hikvision DS-7608NI-M2/8P 8 channel NVR is the Ultra M Series 8-channel recorder built for installations that need real headroom — 8K HDMI output, 128 Mbps incoming bandwidth, support for 32MP camera inputs and up to 32TB of storage across two independent drive bays. It sits at the top tier of Hikvision’s 8-channel recorder range in Australia, and it is the recorder to specify when you want the install to stay fit for purpose for the next five years without replacement.

Whether you are building a high-end residential system, securing a retail environment or fitting out a small commercial site, the Hikvision DS-7608NI-M2/8P 8 channel NVR handles it. Supplied as Authorised Australian Product with full manufacturer warranty. Compatible with the full current Hikvision IP camera range including ColorVu, AcuSense, DarkFighter and Smart Hybrid Light cameras. No HDD included — select your drive capacity separately.

8K HDMI Output — Future-Ready Display for Any Monitoring Setup

The Hikvision DS-7608NI-M2/8P 8 channel NVR outputs up to 8K resolution (7680×4320) over HDMI — a display capability that keeps pace as Hikvision’s camera line continues to push resolution higher. Current 8MP cameras look genuinely sharper on a 4K monitor than on a 1080p monitor, and when higher-resolution cameras become standard on new builds, this NVR does not need replacing. Independent HDMI and VGA outputs allow simultaneous connection to two separate displays — useful for monitoring stations and control rooms where operators need live view and playback running concurrently. No other Hikvision 8-channel recorder in the current Australian range matches the Hikvision DS-7608NI-M2/8P 8 channel NVR on output ceiling.

Plug-and-Play 8-Port PoE — One Cable to Every Camera

Eight integrated PoE ports on the Hikvision DS-7608NI-M2/8P 8 channel NVR power and connect up to 8 Hikvision IP cameras via a single Cat6 cable per camera — no separate power supplies, no additional cabling runs, no patch panel between the NVR and the cameras. IEEE 802.3af/at standard with a total PoE budget of ≤120W across all eight ports, which covers every current standard-PoE Hikvision IP camera and leaves headroom for 802.3at models where fitted. Combined with Hikvision’s plug-and-play camera detection, a full 8-camera system can be online within an hour of the NVR being racked and cabled. For residential and light commercial installers across Australia, this is the most efficient 8-channel deployment platform in the Hikvision range.

128 Mbps Bandwidth and 32MP Input Headroom

128 Mbps incoming bandwidth carries simultaneous high-resolution streams from all 8 channels on the Hikvision DS-7608NI-M2/8P 8 channel NVR without frame drops or quality compromise. Resolution support extends to 32MP and 24MP per channel after ultra HD resolution mode is enabled in settings. In standard mode the NVR handles up to 8MP across all 8 channels simultaneously — the right setting for most current Hikvision camera deployments. Decoding capability reaches 10-ch@8MP (30fps) or 20-ch@4MP (30fps), giving meaningful headroom above what 8 connected channels actually demand and keeping live view and playback smooth under full load.

Up to 32TB Storage with H.265+ for Long Retention

Two independent SATA bays on the Hikvision DS-7608NI-M2/8P 8 channel NVR each accept a surveillance-grade drive up to 16TB — 32TB maximum total. H.265+ compression reduces storage consumption by up to 75% compared to standard H.264, which means substantially more footage on the same hardware or the same retention window on a smaller drive. For Australian commercial operators with compliance requirements around footage retention, the Hikvision DS-7608NI-M2/8P 8 channel NVR at 32TB with H.265+ provides the capacity to meet those obligations without frequent drive changes or cloud storage costs. Add a Hikvision surveillance-grade HDD — consumer desktop drives are not rated for 24/7 NVR workloads and fail prematurely in continuous recording.

Secure Streaming and Evidence-Grade Playback

TLS stream encryption on the Hikvision DS-7608NI-M2/8P 8 channel NVR protects footage in transit between cameras, recorder and remote clients. Double verification for playback and download access blocks unauthorised review of recorded footage — important for sites where footage may be relied on as legal evidence. ONVIF Version 2.5 and RTSP support allow integration with third-party systems and VMS platforms where required, though ONVIF compatibility does not guarantee full feature support on third-party systems — verify at project stage. Web access works without plug-ins, so any modern browser on any OS can reach the Hikvision DS-7608NI-M2/8P 8 channel NVR without client software installation.

Hik-Connect Remote View and IP Speaker Integration

Hik-Connect provides remote live view, playback and push event notifications on iOS and Android from anywhere with an internet connection — essential for Australian operators monitoring multiple sites or handling out-of-hours alerts. The Hikvision DS-7608NI-M2/8P 8 channel NVR supports up to 128 simultaneous remote connections, enough for multi-operator commercial environments where several staff need concurrent access. Up to 8 IP speakers can be connected to the NVR to pair Hikvision audio-deterrence speakers with camera events — when a detection triggers on a connected camera, the speaker plays an automated voice message or alarm tone. OTAP protocol support also enables integration with solar-powered cameras that transmit on demand, opening up remote-site deployments without mains power.


SpecificationDetail
ModelDS-7608NI-M2/8P
SeriesHikvision Ultra M Series
IP Video Channels8 channels
Max Input ResolutionUp to 32MP per channel (ultra HD resolution mode required for 32MP/24MP)
Incoming Bandwidth128 Mbps
Outgoing Bandwidth256 Mbps
HDMI Output8K (7680×4320)/30Hz · 4K (3840×2160)/60Hz · 4K/30Hz · 2K/60Hz · 1920×1080/60Hz
VGA Output1920×1080/60Hz
Video Output ModeIndependent HDMI and VGA output
Decoding FormatH.265+ / H.265 / H.264+ / H.264
Decoding Capability2-ch@32MP + 2-ch@8MP · 10-ch@8MP · 20-ch@4MP · 40-ch@1080p (all @ 30fps)
Synchronous Playback8-ch
PoE Ports8× RJ-45 10/100 Mbps · IEEE 802.3af/at · Total budget ≤120W
HDD Bays2× SATA · Up to 16TB per drive · Max 32TB total — browse surveillance HDDs
Network Interface1× RJ-45 10/100/1000 Mbps self-adaptive
Remote ConnectionsUp to 128 simultaneous
Camera Access ProtocolONVIF Version 2.5 · RTSP
Smart FunctionsVCA (motion, line crossing, intrusion), heat map, ANPR and people counting — on compatible cameras
SecurityTLS stream encryption · Double verification for playback and download
IP Speaker SupportUp to 8 IP speakers can be connected
USB1× USB 2.0 (front) · 1× USB 3.0 (rear)
Alarm I/O4 in / 1 out
Audio1-ch audio in · 1-ch audio out · Two-way audio (RCA)
Power Supply100–240 VAC, 50/60 Hz
Power Consumption≤15W (without HDD, PoE off)
Operating Temperature-10°C to 55°C
Dimensions (W×D×H)385 × 315 × 52 mm
Weight≤3 kg (without HDD)
WarrantyFull manufacturer warranty — Authorised Australian Product

Where the Hikvision DS-7608NI-M2/8P 8 channel NVR Earns Its Place Across Australia

🏠 High-end residential — whole-home security systems — The Hikvision DS-7608NI-M2/8P 8 channel NVR is the right platform for larger residential builds running 5–8 Hikvision IP cameras across perimeter, entries and outbuildings. 8K HDMI output means identification-quality detail holds up at any zoom level on a 4K monitor, and the 32TB storage ceiling keeps weeks of continuous footage on hand for incident review.

🏪 Retail and hospitality — shopfronts, hotels and customer-facing sites — The Hikvision DS-7608NI-M2/8P 8 channel NVR covers tills, entry points and service counters across a single shop on one recorder. 8 PoE ports and plug-and-play camera detection mean a full shop install is cabled and operational in an afternoon. Two-way audio and IP speaker support also let staff address issues from the register without leaving the counter.

🏢 Small commercial and office — multi-entry buildings and staff areas — The Hikvision DS-7608NI-M2/8P 8 channel NVR delivers 8-camera coverage of office floors, building entries or staff car parks with headroom to grow over the lease. 128 Mbps bandwidth supports simultaneous high-res recording, and TLS encryption plus double verification mean playback is secure enough for HR or incident investigations where evidence integrity matters.

🏭 Warehouses and light industrial — loading docks, perimeter zones and yards — Pair the Hikvision DS-7608NI-M2/8P 8 channel NVR with Hikvision DarkFighter or ColorVu cameras for after-hours perimeter coverage, and configure line crossing or intrusion VCA events through the NVR to trigger recording and remote alerts. OTAP support extends coverage to solar-powered cameras in yards without mains power.

Security installers and integrators — specifying above the standard — The Hikvision DS-7608NI-M2/8P 8 channel NVR is a clean 8-channel solution for clients who expect more than a baseline recorder. 8K HDMI output, 32MP input ceiling and 128 Mbps bandwidth are tangible differentiators you can walk a customer through during a site visit. Full manufacturer warranty through Authorised Australian Product supply also protects your RMA exposure.

How This 8-Channel NVR Compares to the Smaller 4-Channel Ultra M

Choosing between the Hikvision DS-7608NI-M2/8P 8 channel NVR and its 4-channel sibling the DS-7604NI-M1/4P? Both sit in the same Ultra M platform with 8K HDMI output — the hardware scales to match the install.

FeatureDS-7608NI-M2/8P (this NVR)DS-7604NI-M1/4P (4-ch Ultra M)
IP Camera Channels84
Integrated PoE Ports84
HDD Bays / Max Storage2× SATA / up to 32TB1× SATA / up to 16TB
8K HDMI Output
Best Fit5–8 camera sites needing storage headroom and longer retention1–4 camera sites (small homes, single shopfronts)
Frequently Asked Questions — Hikvision DS-7608NI-M2/8P

Q: Can I use the Hikvision DS-7608NI-M2/8P 8 channel NVR with my existing Hikvision IP cameras?
The DS-7608NI-M2/8P works with current model Hikvision IP cameras including ColorVu, AcuSense, DarkFighter and Smart Hybrid Light models. Older Hikvision cameras typically connect for basic recording but may not expose newer features — firmware version and camera model both matter. ONVIF Version 2.5 and RTSP support allow third-party IP cameras to connect for recording, though ONVIF compatibility does not guarantee full feature support on third-party systems — verify at project stage. If you are not sure whether your cameras are compatible, chat with us before purchase.

Q: Do I need to change any settings to use 32MP cameras?
Yes — ultra HD resolution mode must be enabled in the NVR settings before the Hikvision DS-7608NI-M2/8P 8 channel NVR accepts 32MP or 24MP camera inputs. In standard mode the NVR handles up to 8MP across all 8 channels. Enabling ultra HD mode changes simultaneous decoding capability — refer to the datasheet for full decoding figures under each mode.

Q: What HDD do I need for the Hikvision DS-7608NI-M2/8P 8 channel NVR?
Any surveillance-grade SATA drive up to 16TB per bay, for a 32TB maximum across both bays. Consumer desktop drives are not rated for 24/7 NVR workloads and fail prematurely in continuous recording — always fit surveillance-grade drives such as WD Purple or Seagate SkyHawk. Browse compatible Hikvision surveillance HDDs.

Build a Complete Hikvision System

The Hikvision DS-7608NI-M2/8P 8 channel NVR pairs directly with any current Hikvision IP camera via the integrated PoE ports — plug-and-play detection, no manual IP configuration. Fit up to 2 Hikvision surveillance HDDs for 32TB total storage capacity. Run Cat6 cable from each PoE port to each camera for a single-cable install. Add compatible brackets and junction boxes for clean mounting. For alarm integration, pair with a Hikvision AX Pro wireless alarm system — alarm events trigger camera recording automatically.

The Hikvision DS-7608NI-M2/8P 8 channel NVR is part of the Hikvision NVR range at Comms Direct — supplied as Authorised Australian Product with full manufacturer warranty. Ships fast from Australian warehouses. For 16-channel and above systems, enterprise specification or $10k+ project supply, contact our Project Supply Desk for project pricing and technical support.

Backed by full manufacturer warranty — Authorised Australian Product. For warranty, returns or pre-purchase technical advice, contact us via the enquiry form or chat with us online.

Additional information

Weight1 kg
Dimensions44 × 39 × 8 cm
Only logged in customers who have purchased this product can leave a review.