Hikvision DS-7616NI-M2/16P Ultra Series 16-Channel 8K NVR — 16×PoE, Dual HDD Bays, 4TB HDD Included

The DS-7616NI-M2/16P is Hikvision’s Ultra Series M 16-channel NVR — and it’s a different class of recorder to what most 16-channel buyers are used to seeing. 8K HDMI output, 256 Mbps incoming bandwidth, decoding up to 40-ch@1080p or 10-ch@8MP simultaneously, 16 integrated PoE ports and a 4TB surveillance-grade HDD already installed. This is the NVR for Australian installers, integrators and operators who know that the recorder is where a high-resolution camera system either delivers on its promise or falls short — and who spec accordingly.

Compatible with the full range of current Hikvision AcuSense IP cameras. Third-party ONVIF cameras may be compatible — verify against the Hikvision camera compatibility list before deployment as not all ONVIF devices are guaranteed to work with this NVR. Hik-Connect app for remote live view, playback and push event alerts on iOS and Android from anywhere in Australia.

8K HDMI Output — Control Room Grade Display in a 16-Channel 1U Platform

Most 16-channel NVRs top out at 4K HDMI output. The DS-7616NI-M2/16P outputs genuine 8K (7680×4320/30Hz) — the same display tier found in Hikvision’s enterprise Ultra Series platforms. What this means in practice is that a 16-camera deployment running 6MP or 8MP cameras can display footage at the full resolution the cameras are actually capturing — no downscaling to fit a 4K output ceiling. HDMI and VGA operate independently for simultaneous dual-monitor setups — primary 8K display for live view and secondary 1080p VGA for a second workstation or management interface. For Australian security installers speccing systems with dedicated monitoring stations, this capability in a compact 1U form factor removes the need to step up to larger and more complex platforms purely for display performance.

256 Mbps Bandwidth — Headroom That Shows Under Load

Bandwidth on a 16-channel NVR matters most when all 16 cameras are running simultaneously — live view, continuous recording, remote access streams and playback all competing for the same pipe. At 256 Mbps incoming bandwidth, the DS-7616NI-M2/16P handles 16 channels of 6MP or 8MP footage simultaneously without the frame drops, buffering and live view degradation that undersized recorders show under full load. This is also why the decoding architecture matters — 10-ch@8MP or 20-ch@4MP or 40-ch@1080p simultaneously at 30fps means the recorder’s processing keeps pace with what the cameras are actually sending, regardless of resolution mix across the 16 channels.

Decoding at Scale — All 16 Cameras, Full Performance

The DS-7616NI-M2/16P decodes 2-ch@32MP alongside 2-ch@8MP, or 10-ch@8MP, or 20-ch@4MP, or 40-ch@1080p — all at 30fps. For installers speccing systems where every camera is running at 8MP, this decoding headroom is not theoretical — it’s the difference between a system that performs under full load and one that stutters during peak recording and viewing periods. 16-channel synchronous playback for full-site incident review without channel switching. 32MP and 24MP recording is supported — up to 8 channels simultaneously with ultra HD mode enabled — for deployments using specialist ultra-high-resolution cameras alongside standard network cameras on the same recorder.

16× Integrated PoE — Single-Cable Installation Across All 16 Cameras

Sixteen integrated PoE ports power and connect up to 16 IP cameras via a single Cat6 cable per run — IEEE 802.3af/at, plug-and-play camera detection. No separate PoE switch, no additional power supplies, no second cable run per camera. For Australian electricians and security installers, this is the most efficient 16-camera Ultra Series deployment architecture available — run Cat6 to each camera position, connect, and the NVR autodetects. Combined with Hik-Connect remote commissioning, a 16-camera Ultra Series system can be fully configured, tested and handed over in a single site visit. Clean, fast, no callbacks.

4TB Pre-Installed, Dual SATA Bay — Recording From Day One, Room to Grow

The 4TB surveillance-grade HDD is installed and formatted before shipping. Connect the cameras and the system is recording — nothing else required. H.265+ compression reduces storage consumption by up to 75% compared to H.264, meaning substantially more footage retained on the same 4TB before the system begins overwriting older recordings. When extended retention is needed, the second SATA bay accepts an additional Hikvision surveillance-grade HDD — installed on-site at any point without disrupting the running system. Consumer desktop drives are not rated for 24/7 NVR workloads and should not be used in either bay.

VCA Analytics, ANPR & POS — Commercial-Grade Intelligence Standard

The DS-7616NI-M2/16P supports a full VCA analytics suite across all connected cameras — people counting, heat mapping, line crossing detection, intrusion detection, fisheye camera dewarping and ANPR for automatic number plate recognition. These are not add-on features requiring additional licensing or hardware — they are built into the platform and available across all 16 channels. POS integration overlays point-of-sale transaction data directly on live view and playback footage, with POS-triggered recording and alarm events for loss prevention environments. For Australian retail premises, service businesses and commercial operators, this level of analytics capability in a 16-channel 1U platform represents genuine enterprise functionality at the Ultra Series price point.

Ideal Applications Across Australia

🏪 Retail & commercial premises — 16 cameras covers shopfronts, stock areas, car parks and all entry points simultaneously. POS integration links transaction data directly to footage. ANPR and people counting built in without additional hardware or licensing

🏢 Office buildings & commercial sites — full 16-camera coverage with 8K HDMI output for dedicated monitoring stations. 256 Mbps bandwidth and 40-ch@1080p decoding handles simultaneous live view, recording and remote access across all cameras without degradation

🏠 Large residential properties — full perimeter and access point coverage across large homes, acreage and rural properties across Australia. 16 PoE ports, one Cat6 cable per camera, Hik-Connect remote monitoring from anywhere

⚡ Electricians & security installers — complete 16-camera Ultra Series deployment from a single 1U unit. 4TB pre-installed, 16 PoE ports, Hik-Connect handover. No return visits, no missing components, no callbacks

🏗️ Commercial projects — for larger deployments or $10k+ project supply across Australia, contact our Project Supply Desk for tailored project pricing

The DS-7616NI-M2/16P is part of the Hikvision NVR range available at CommsDirect — sourced through authorised Australian distribution with full Australian manufacturer warranty. For 32-channel and above deployments or commercial projects across Australia, contact our Project Supply Desk for project pricing and specification support.

For warranty enquiries or pre-purchase technical advice, contact us via the enquiry form or chat with us online.