Shop

For a limited time, spend $275 or more on any Brand of CCTV, or on Hikvision Alarms and receive Free Shipping within Australia for all of those components in your cart! *Excludes Cable, Racks, UPS + Monitors

HiLook 8 Channel CCTV Kit for Outdoor Security, 4K D Series Series NVR, 2x T381H-MU 8MP, 6x T361H-MU 6MP AI Cameras, Night Vision, 6TB

20/04/2025
DS-2CD2387G3-LIS2UY/SL

Hikvision DS-2CD2387G3-LIS2UY/SL 8MP ColorVu 3.0 AI Turret Camera with Strobe Light, Two-Way Audio, 2.8mm Lens, IR 30m, Mic – Black

24/04/2025
Show all
Sale ends in
0 0 0
Days
1 1
Hours
5 0
Minutes
1 8
Seconds

Hikvision DS-2CD2387G3-LIS2UY/SL 8MP 4K ColorVu Smart Hybrid Light Turret Camera 2.8mm AcuSense Active Deterrence Two-Way Audio

AUD $353.00 inc GST

DS-2CD2387G3-LIS2UY/SL — 8MP 4K ColorVu · 2.8mm 108.8° FOV · Smart Hybrid Light · AcuSense AI · Two-Way Audio · Active Deterrence

The Hikvision DS-2CD2387G3-LIS2UY/SL is Hikvision’s current-generation 8MP 4K ColorVu turret with a 2.8mm fixed lens (108.8° horizontal FOV) — combining Smart Hybrid Light (IR + white light), AcuSense AI person and vehicle detection, active strobe deterrence, and full two-way audio in a single IP67-rated unit. Built for Australian homes, businesses and security installers who need professional-grade protection without compromise.

📷 8MP 4K Resolution — 3840 × 2160 — ultra-detailed footage that holds up when you need to identify faces and vehicles at distance

🌈 ColorVu Low-Light Imaging — 0.0005 Lux @F1.0 — colour-capable sensor performs in near-darkness without relying on visible light

💡 Smart Hybrid Light — White Light + IR, 30m Range — three supplemental lighting modes: IR-only discreet monitoring, white light colour night vision, or smart mode where white light fires on AI-confirmed detection only

🧠 AcuSense AI Detection — Person & Vehicle Classification — deep learning filters out false alarms from animals, foliage and passing headlights; face capture supported

🚨 Active Deterrence — Strobe Light + Audio Alarm — fires only on AI-confirmed human or vehicle intrusion, not on general motion

🔊 Full Two-Way Audio — Arrayed Dual Mic + 2W Speaker (110 dB) — real-time communication from anywhere via Hik-Connect

☀️ 130 dB Scene-Adaptive WDR — clear, usable footage in direct sunlight, car headlights or mixed indoor/outdoor lighting

💾 512GB MicroSD Local Storage — on-board backup recording with ANR support; card not included

📡 PoE+ 802.3at — Single Cable Power & Data — requires PoE+ switch or injector (802.3at); standard 802.3af is not sufficient

🌧️ IP67 + NEMA 4X Anti-Corrosion — fully weatherproof and corrosion-resistant housing for harsh outdoor environments including coastal sites

🏆 RCM Certified — 3-Year Australian Warranty — sourced through authorised Australian distribution

 

Available models:
DS-2CD2387G3-LIS2UY/SL-0280 — 2.8mm White (this product)
DS-2CD2387G3-LIS2UY/SL-0400 — 4mm White
DS-2CD2387G3-LIS2UY/SL-0280-BLK — 2.8mm Black

Hikvision brackets & mounts: View Hikvision brackets and junction boxes

Download Datasheet

DS-2CD2387G3-LIS2UY/SL — 8MP 4K ColorVu Smart Hybrid Light Turret 2.8mm — for Australian Homes & Business
8MP 4K · 2.8mm 108.8° FOV · ColorVu Low-Light · Smart Hybrid Light IR+White · AcuSense AI · 130dB WDR · Two-Way Audio · Active Deterrence · PoE+ 802.3at · 512GB MicroSD · IP67 · NEMA 4X · RCM · 3-Year Warranty

The Hikvision DS-2CD2387G3-LIS2UY/SL is Hikvision’s current-generation 8MP 4K ColorVu turret with a 2.8mm fixed lens delivering a 108.8° horizontal field of view — combining Smart Hybrid Light (IR + white light), AcuSense AI person and vehicle detection, active strobe deterrence, and full two-way audio in a single IP67-rated unit. Built for Australian homes, businesses and security installers who need professional-grade protection without compromise.

8MP 4K ColorVu — Colour Detail That Holds Up When It Matters

Built on a 1/1.8″ progressive scan CMOS sensor with an F1.0 aperture and a minimum colour illumination of 0.0005 Lux, the DS-2CD2387G3-LIS2UY/SL captures rich colour detail in conditions where lesser cameras produce blurry, grey footage. The 2.8mm fixed lens delivers a wide 108.8° horizontal field of view — ideal for driveways, entry points, shopfronts and open areas where broad coverage from a single camera is the priority. At 3840 × 2160 (8MP 4K), footage quality is high enough to identify faces, clothing colour and vehicle make at meaningful distances — critical for investigations and insurance claims across Australian homes, retail sites and commercial properties.

Smart Hybrid Light — Three Illumination Modes, One Camera

Unlike standard white light cameras that blast visible light continuously all night, the Smart Hybrid Light system integrates both 850nm IR and white light LEDs with three configurable supplemental lighting modes — giving you precise control over how the camera behaves after dark:

Smart Hybrid Light — Three Modes
🌙 IR Mode — IR LEDs run continuously for discreet night monitoring. No visible light. B/W footage.
💡 White Light Mode — White LEDs run continuously for full colour night vision. Visible light emitted.
🤖 Smart Mode — IR runs continuously for discreet monitoring. White light activates only on AI-confirmed human or vehicle detection, then deactivates — colour footage on detection events only, no continuous light impact between events.

All three modes cover up to 30 metres. In Smart mode, neighbours and the surrounding environment experience no light intrusion between detection events — only at the moment it matters.

AcuSense AI — Person & Vehicle Classification with Face Capture

Hikvision’s AcuSense deep learning engine classifies targets as human or vehicle before triggering any alarm — eliminating the false alerts that plague sites with pets, foliage, passing headlights or other motion sources. Perimeter protection covers line crossing, intrusion, region entrance and region exit, all filtered by target type. The DS-2CD2387G3-LIS2UY/SL also supports face capture — a step up from standard AcuSense cameras — enabling face-based search and review via Hik-Central and compatible NVRs. For security installers and system integrators specifying cameras for managed sites, face capture adds significant post-incident value without requiring a separate specialised camera.

Active Deterrence — Strobe + Audio Alarm That Fires on AI Confirmation

The built-in strobe light and audio alarm are linked directly to AcuSense AI detection — they activate only when a human or vehicle target is confirmed, not on general motion. This distinction matters: a camera that strobe-alerts on every passing car or bird becomes ignored background noise within days. On the DS-2CD2387G3-LIS2UY/SL, deterrence is specific and deliberate. The active deterrence schedule is fully configurable — restrict it to after-hours only, disable strobe while retaining AI recording, or adjust trigger sensitivity per zone. For residential driveways, retail shopfronts and construction sites across Australia, this is the difference between a deterrence system that works and one that gets switched off.

Full Two-Way Audio — Arrayed Dual Microphone + 2W Speaker

A built-in arrayed dual-microphone provides higher-quality audio capture than single-mic cameras — environmental noise filtering is applied to both channels for clear, intelligible recordings. The integrated 2W speaker (110 dB @10cm) enables real-time voice-down via Hik-Connect from a smartphone or desktop — address visitors, warn intruders, or communicate with delivery personnel without opening a door or leaving your desk. Audio and alarm interfaces also support external connections for more complex site integrations.

130 dB WDR + HikAI-ISP — No Blown-Out or Crushed Footage

With 130 dB scene-adaptive Wide Dynamic Range and Hikvision’s HikAI-ISP noise reduction processing, the camera handles the lighting conditions that break most fixed-lens cameras: shopfronts with bright outdoor light and dim interiors, car parks with direct headlight exposure, entrances with strong backlight. The result is usable, detail-rich footage in the situations where security incidents most often occur — not just in ideal lighting conditions.

PoE+ 802.3at — Single Cable, Power and Data

The DS-2CD2387G3-LIS2UY/SL draws up to 17W via IEEE 802.3at PoE+ (Class 4). A single Cat6 cable from a compatible PoE+ switch or NVR handles both power and data — no separate power supply required. Note: standard 802.3af PoE is not sufficient for this camera. All current Hikvision AcuSense NVRs with built-in PoE ports support 802.3at — confirm your switch or NVR spec before ordering if using non-Hikvision infrastructure. ONVIF compliance (Profile S, G, T) is supported; note that ONVIF compliance does not guarantee full feature support on third-party NVR systems.


Specification Detail
Model DS-2CD2387G3-LIS2UY/SL(2.8mm)
Image Sensor 1/1.8″ Progressive Scan CMOS
Max Resolution 3840 × 2160 (8MP 4K)
Min Illumination Colour: 0.0005 Lux @F1.0 · 0 Lux with light
WDR 130 dB Scene-Adaptive
Lens 2.8mm fixed · F1.0 aperture · 108.8° horizontal FOV
Illuminator Smart Hybrid Light — White Light + IR 850nm · up to 30m
AI Detection AcuSense — person & vehicle classification · face capture
Smart Events Line crossing · intrusion · region entrance · region exit — human/vehicle filtered
Active Deterrence Strobe light (white) + audio alarm — AI-triggered only
Audio Arrayed dual-microphone + 2W speaker (110 dB @10cm) — full two-way audio
Compression H.265+ / H.265 / H.264+ / H.264
Power PoE+ IEEE 802.3at Class 4 max 17W · or 12VDC — 802.3af not supported
Local Storage MicroSD/SDHC/SDXC · up to 512GB · ANR · card not included
Ingress Protection IP67 · NEMA 4X anti-corrosion
Housing Metal cover · metal main body
Operating Temperature -30°C to 60°C
Weight Approx. 820g
Certification RCM · CE · UL · NEMA 4X · 3-year Australian warranty

Where This Camera Earns Its Place Across Australia

🏠 Residential — driveways, entry points and side access — the 2.8mm wide-angle lens covers a full driveway or entry zone from a single mounting point; Smart mode keeps the yard dark between events while full-colour footage and voice-down capability give homeowners genuine control from their phone at any hour

🏪 Retail shopfronts and small commercial — active deterrence fires on AI-confirmed intruder detection after hours, reducing false alarm callouts while face capture supports post-incident review for staff disputes and theft investigations

🏭 Warehouses and industrial sites — NEMA 4X anti-corrosion housing combined with IP67 weatherproofing handles the demanding environments that standard cameras deteriorate in; AcuSense filtering prevents perimeter alarms being triggered by forklifts, machinery or environmental movement

🏢 Offices and commercial buildings — two-way audio enables reception staff or security teams to communicate directly with anyone in the camera’s field of view without being physically present; pairs with Hikvision AcuSense NVRs for multi-camera face capture and perimeter search

Electricians and security installers — single Cat6 cable handles power and data via PoE+; confirm 802.3at capability on the switch or NVR before installation; all current Hikvision AcuSense NVRs with built-in PoE ports support 802.3at and are plug-and-play compatible

Feature DS-2CD2387G3-LIS2UY/SL DS-2CD2387G2-LSU/SL
Generation G3 (current) G2 (previous)
Resolution 8MP 4K 3840 × 2160 8MP 4K 3840 × 2160
Illuminator Smart Hybrid Light — White + IR (3 modes) White Light only
WDR 130 dB 130 dB
Active Deterrence ✓ Strobe + audio alarm ✓ Strobe + audio alarm
Microphone Arrayed dual-microphone Single microphone
Face Capture
Anti-Corrosion NEMA 4X Standard
PoE Requirement 802.3at (PoE+) 802.3af (standard PoE)
Frequently Asked Questions — DS-2CD2387G3-LIS2UY/SL

Q: Does the white strobe light stay on all night, or only when something is detected?
In Smart mode (the default recommended configuration), the IR LEDs run continuously for discreet monitoring and the white light activates only when AcuSense confirms a human or vehicle — then deactivates. The white light does not stay on all night in Smart mode. If you configure the camera in White Light mode, it will illuminate continuously. The strobe alarm fires only on AI-confirmed detection events regardless of lighting mode. Schedules can be configured to restrict active deterrence to after-hours only, or disable strobe entirely while retaining AI detection and recording.

Q: Does this camera require PoE+ — will my existing switch or NVR work?
Yes — the DS-2CD2387G3-LIS2UY/SL requires IEEE 802.3at PoE+ (Class 4, max 17W). Standard 802.3af PoE (15.4W) is insufficient and the camera will not power on correctly. All current Hikvision AcuSense NVRs with built-in PoE ports (S-Series, Ultra M, VPro) support 802.3at and are fully compatible. If you’re using a third-party switch, confirm it supports 802.3at per-port output before installation.

Q: What is the arrayed dual-microphone and how does it differ from a standard built-in mic?
The arrayed dual-microphone uses two microphone elements with directional processing to improve speech intelligibility and reduce background noise — particularly useful on sites with machinery, traffic or wind. A single-element mic captures all sound equally; the dual array can better isolate the voice of someone speaking directly toward the camera. Combined with environment noise filtering, audio quality for two-way communication and recording is significantly improved over standard single-mic cameras.

Build a Complete Hikvision System

The DS-2CD2387G3-LIS2UY/SL pairs directly with the Hikvision AcuSense NVR range for plug-and-play installation — all built-in PoE ports on current Hikvision NVRs support 802.3at and are fully compatible with this camera. Run Cat6 cable from each NVR PoE port to each camera — one cable carries both power and data. Add compatible brackets and junction boxes for wall or eave mounting. For whole-property integrated protection, pair with a Hikvision AX Pro wireless alarm system — alarm events trigger camera recording automatically for a unified security response across your site.

The DS-2CD2387G3-LIS2UY/SL is part of the Hikvision 8MP camera range at Comms Direct — sourced through authorised Australian distribution with full 3-year manufacturer warranty. Ships fast from Australian warehouses. For multi-camera project deployments or $10k+ project supply, contact our Project Supply Desk for project pricing and specification support.

For warranty enquiries or pre-purchase technical advice, contact us via the enquiry form or chat with us online.

Additional information

Weight 1 kg
Dimensions 17 × 15 × 17 cm
Only logged in customers who have purchased this product can leave a review.