Hikvision – DS-PDCM15PF-IR – AX Pro Video Verification Camera Module

The Hikvision AX Pro PDCM15PF camera module turns an alarm trigger into something you can actually see. When the detector it sits on is activated, the module captures a colour image of the scene and sends it through your AX Pro hub to the Hik-Connect app and your monitoring centre — so a real intruder and a swaying branch no longer look the same on the keypad. Day or night, you confirm what happened before anyone is sent to site.

Hikvision AX Pro PDCM15PF Camera Module — Video Verification for Your Tri-Tech Detector

Most alarm sensors only tell you that something moved — never what. The Hikvision AX Pro PDCM15PF camera module closes that gap with on-demand visual verification (IVaaS): the instant its detector trips, it grabs a colour snapshot of the zone and the AX Pro hub buffers it for your app and alarm receiving centre. That single image is the difference between a guessed response and an informed one — confirm a genuine break-in and escalate fast, or stand down a false trigger without rolling a patrol.

Day-and-Night Colour Images — Infrared Fill to 15m

The Hikvision AX Pro PDCM15PF camera module uses a 1/2.7″ progressive-scan colour CMOS sensor for clear daytime images, and automatic day/night switching brings in infrared fill to 15m so the verification image is just as readable after dark. 3D digital noise reduction keeps those low-light frames clean rather than grainy. Whether the alarm fires at midday or 2am, you get a usable picture of the scene, not a black square.

Wide 137° Coverage, Angle-Matched Install — Mounts Straight to the Detector

The Hikvision AX Pro PDCM15PF camera module pairs a 2.0mm fixed lens with a wide 137.2° horizontal field, so the image takes in the detector’s whole coverage area instead of a narrow slice. The module clips directly onto the Tri-Tech detector and its angle adjusts to match the detector’s aim, so the picture frames exactly what triggered the alarm. There is no separate cabling to run — it draws power and sends images through the detector — and an IP66 rating means it is built for the same exposed outdoor positions the detector protects.

Where the Hikvision AX Pro PDCM15PF Camera Module Earns Its Place Across Australia

🏡 Rural and acreage perimeters — out on a property line a single false alarm can mean a long drive to a quiet gate. Adding the camera module to a perimeter Tri-Tech detector lets you check the image from the house or the app and decide whether it’s a person or a roo before you head out in the dark.

🏠 Homes with monitored alarms — when the family is away, a triggered sensor sends an image straight to the app and the monitoring centre, so a genuine intrusion is verified and escalated quickly while a possum on the fence is dismissed without a call-out fee.

🏭 Yards, sites and storage compounds — perimeter detectors on a commercial yard catch movement after hours; the camera module shows exactly who is in the compound, turning a vague alert into evidence security can act on.

🏢 Monitored and CMS-linked sites — alarm receiving centres can verify before dispatch, cutting wasted patrols on false triggers and prioritising the alarms that come with a picture of a real person on site.

⚡ Security installers — the Hikvision AX Pro PDCM15PF camera module clips to a detector you are already fitting and angle-matches in minutes with no extra cabling, so you add visual verification to an AX Pro job for very little time on the tools.

Here is what the Hikvision AX Pro PDCM15PF camera module changes about what a Tri-Tech detector can tell you:

The DS-PDCM15PF-IR is part of the Hikvision AX Pro wireless alarm range at Comms Direct — supplied as Authorised Australian Product, covered by manufacturer warranty. Ships fast from Australian warehouses. For multi-site project deployments or $10k+ project supply, contact our Project Supply Desk for project pricing and specification support.